3010/2GW5
How to order:
Available Headstyles
Switching Probe 3010/2GW5 with thread
threaded switching probe for easy replacement - without wiring
| Headstyles | Diameter • Plating | ||
| A |  |
2,30 • AU | |
| C |  |
2,30 • AU | |
| CL |  |
2,30 • AU | |
| C1 |  |
1,00 • AU | |
| CL1 |  |
1,00 • AU | |
| F |  |
1,80 • AU | |
| F |  |
2,30 • AU | |
| F1 |  |
3,00 • HTK | 4,00 • HTK |
5,00 • HTK |
|||
 |
Switching Contact 3010/2GW5 – for easy replacement – without soldering For replacement of standard switching contacts in test modules you have to remove the wire from the pin by a soldering process. The new PTR easy replacement principle allows interchanging of the contact without loosing the wire. The test module does not have to be removed from the test table. This will reduce time and costs for maintenance. The switching contact and the receptacle are equipped with a special designed pin and socked system. The wire can be soldered directly at the connector pin of the receptacle. |
| Mechanical | ||
| Spacing | 4,00 mm | |
| Full Travel | 5,0 mm | |
| Recommended working travel | 4,00 mm | |
| Switching travel (± 0,2mm) | 1,7 mm4,0 mm | |
| Pre-loaded spring force | 0.12/ 0.3/ 1.8/ 1.7/ 2.7/ 5,0N | 0.12/ 0.3/ 1.8/ 1.7/ 2.7/ 5,0N |
| Spring force at switching travel (± 20%) |
0,18/ 0,7/ 3,6/ 4,4/ 5,4/ 8,0N | 0,25/1,3/ 6,0/ 8,0/ 9,0/ 12,0N |
| Spring force at working travel (± 20%) |
1,25/ 2,3/ 7,0/ 9,0/ 10,0/ 13,0N | 0,25/ 1,3/ 6,0/ 8,0/ 9,0/ 12,0N |
| Electrical | Receptacle - Plunger | Pin - Plunger |
| max. current rating | 5,0 A | 1,0 A |
| Typ. continuity resistance | < 15 mOhm | < 50 mOhm |
| Insulating voltage | 1000 V | 1000 V |
| Materials | ||
| Barrel | bronze, gold plated | |
| Spring | spring steel, gold plated | |
| Plunger | steel, gold plated or with plastic head | |
| Receptacle | brass, gold plated | |
| Recommended Diameter of Drill |
H 3010/GW H 3010/GW5 |
|
| HP 2361.1 (Trolitax) | 3,28 mm | |
| HGW2372 | 3,29 mm | |